標題: [汽車研究] FOCUS降車身後使用仰角或束角調整器之替代品 [列印本頁]

---

作者: nt3263    時間: 2012-7-5 12:43 AM     標題: FOCUS降車身後使用仰角或束角調整器之替代品

剛剛看到這個東西，不知道是否可取代FOCUS在降低車身後須使用的仰角及束角調整器？？？

One pair Eibach camber adjustment bolts for:
Make:Ford
Model:Focus ST225 Mk2
Year: 2004 > 2011
Bolt location: Rear
Camber Adjustment: -1.75 deg to +1.75 deg

Once a vehicle is lowered, wheel camber may become excessively negative, meaning the top of the tyre is angled inward (toward the center of the vehicle). While some negative camber aids in improving traction and road adhesion, too much can result in compromised handling and accelerated tyre wear.

Eibach offers a complete range of Pro-Alignment kits, which provide a simple, affordable solution to correct excessive negative camber.

These alignment kits not only assist in adjusting a vehicle’s camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to "dial-in" a performance-oriented alignment that uses negative camber to maximize a chassis’ true potential.

With correct alignment, turn-in becomes more precise and handling becomes gratifyingly crisp and predictable. Highspeed stability is also enhanced, making an Eibach Pro-Alignment kit a necessity for the serious performance tuner.

---

作者: 殷海薩    時間: 2012-7-5 01:19 AM

你好~應該不行吧..避震形式不一樣..這ㄍ應該是所謂ㄉ麥花臣式ㄉ避震再用ㄉ吧~有錯誤請糾正~感恩!!

---

作者: erazdjamz    時間: 2012-7-5 01:25 AM

按照英文的解釋 應該是可以~   但是不是100%確定

小弟知識淺薄

細節可能要請板上的前輩來說明了

---

作者: jeff1973    時間: 2012-7-5 10:19 AM

文字說明是使用在後輪

可是圖面的解釋卻是前輪

我是看避震器去判斷的

所以.....怪怪的

---

作者: ataidx    時間: 2019-8-21 08:08 AM

https://forums.focaljet.com/showthread.php/582846-How-To-Camber-Bolts
我在國外網站看到的，可以調整+-1度的範圍。

---

作者: cc5528tw    時間: 2019-9-15 06:33 AM

可以回原廠請教技師