網路上看到的!! JUST SHARE.
Step 1: Remove small tweeter panel. There are no screws for this one, it's only clipped on.
Step 2: Remove door handle screw (Torx 25)
Step 3: Remove door deflector and screw, also Torx 25.
Step 4: Remove small side panel and screw, also Torx 25.
Step 5: Remove arm rest modling, it's only clipped.
Step 6: Remove arm rest controls housing and unclip the harnesses
Step 7: Remove both arm screws behind the controls housing from the arm rest.
Step 8: Remove panel, it has about 7 clips so be careful.
